How to Increase WiFi Speed/Signal Strength

Slow Wi-Fi may disrupt Zoom meetings, create chaos in online communities and stop the video stream to buffer. If your life is dependent on instant connectivity, these small issues can...

Slow Wi-Fi may disrupt Zoom meetings, create chaos in online communities and stop the video stream to buffer. If your life is dependent on instant connectivity, these small issues can quickly can become a major obstacle to work as well as school work and everyday life.

Nobody wants that. So we’ll guide you through 10 easy steps to gain faster Wi-Fi connectivity.

Check your Internet speed

Before you begin before you start, do before you start, run our speed test for your internet. It’s not in our checklist of 10 items to do, however, it’s a good way to get a sense of understanding the situation. Utilize your initial speed test results as a reference point and then check your results as you progress through each step. That will let you know how it’s affecting.

It is also possible to check the results against the advertised maximum speed for your Internet plan. So, you’ll know whether your internet speeds are not performing well or if it’s the right time for you to switch to a better plan.

Remember that the majority of ISPs provide speeds only for an cabled Ethernet connection. It’s perfectly normal, and even quite normal to get less than the stated maximum, specifically when using Wi-Fi. The most important thing is enjoying a seamless browsing experience.

If your speed is close to what they should be, but you’re still experiencing slow internet, it’s likely that you’re overloaded with your connection and require a more powerful internet service.

Perform the speed test

There are many reasons you could be experiencing slow internet, and it’s best to begin with the fundamentals. Perform a speed test to find out what speed of internet the router is receiving before it is converted into the wireless signal.

If you’re not getting 5 Mbps at minimum, it could be a sign that you have issues with your internet provider -20 Mbps is more frequent, however the speed you get will depend on the ISP you use and your internet plan.

If the service you’re experiencing does not match the plan that you purchased, make contact with your ISP or look into upgrading your router if it’s outdated.

However If you’re experiencing the expected speed from your plan, yet it’s still slow it could be because you’re required to upgrade your internet service to one that has faster speeds.

Make sure that you’re connected to the 5Ghz band.

If you own a dual-band or tri-band Wi-Fi router you should use the 5GHz band, not the 2.4GHz band as often as possible.

A lot of smart gadgets (like video doorbells, smart speakers) will only work on slow 2.4GHz band, however your laptop, phone television, tablet, and phone must all be connected to 5GHz to make use of the speed that it provides.

Utilize the Wi-Fi settings on every device to determine which frequency of Wi-Fi you’re using. You should then allow the devices to select the frequency that is most appropriate for them. This is possible when you own modern routers by visiting its configuration page, selecting the 5GHz band option and then giving this band the exact name, or number of SSIDs as for it is for 2.4GHz band.

Reposition your router

If your router has passed the speed test, but your Wi-Fi performance is slow or stops working frequently the reason could be that it is located in a poor way. WiFi signals aren’t able to penetrate solid surfaces, and certain factors block the signal from reaching the right temperature – for example, brick walls, metallic appliances (like refrigerators) as well as large quantities of water, such as fish tanks.

The best spot to put your router for Wi-Fi is in an area with plenty of space to breathe, which means it is most likely to reach the outskirts of your home with no obstacles.

Update the firmware of your Wi-Fi router.

Are your router’s firmware current? If the firmware hasn’t been since a long time or at all, the performance of your router could be affected.

A few routers are able to upgrade their firmware on their own and therefore, you should use the mobile application of your router (if it’s got one) or log in to its control panel to see whether the firmware is changed. This process could be particularly difficult if you own an older router, so make sure to check the user manual for more details.

If your router has the most current firmware, make sure to keep it up-to the latest version if it does not perform automatic updates. Doing this is the most efficient method to make sure that your router is equipped with the latest security and performance features. But, if your router is outdated it’s likely that the manufacturer will not provide updates for it and you’ll need to update.

Change to a more congested channel

The router you are using may have several channels to choose to broadcast Wi-Fi signals. Do not think of the channel as a frequency band. There are numerous channels in the 2.4GHz and 5GHz bands. Although most routers will default to one channel in each band there are times when they’re very congested. This can cause a slowdown in the speed of your WiFi.

Try checking your router’s mobile application (if it’s available) or log in to the control panel for admins. attempt switching to a new channel to see if this increases the performance of your router. You may need to look through the user guide of your router for more details.

Check to make sure there aren’t Wi-Fi freeloaders

Your Wi-Fi may be buckled to the strain of many users or devices that are all connected to your internet simultaneously. If you’re not securing your Wi-Fi connection with an secure password it’s quite likely that your neighbors are connected to your network and draining your bandwidth. If this is the case you must use the mobile app on your router or the admin control panel to alter your password as soon as possible and ensure it’s a safe one, too.

Even if you’re not an internet connection that is free, it could be strained by the multitude of devices within your home. If many family members try to stream Netflix simultaneously it could slow down the stream significantly.

To find out, go through your list of all devices that are connected with your router (again your router’s mobile app or control panel will usually have the information) and then use the router’s admin controls to remove users or devices that you do not would like to have connected to the internet.

Increase the range of your Wi-Fi network

When your network is located in the right spot but you’re having slow speeds or connection issues specific areas of your house it may be necessary to install devices that extend your network’s reach.

There are several tools you can utilize to extend the coverage of your network.

  • Wireless boosters are placed on top of your router in dead zone. They either increase or redistribute existing WiFi signals to the new zone.
  • Wireless access points can connect with your router through an Ethernet cable, and are able to transmit LAN and Wi-Fi signals to extend your router, much like the Wi-Fi booster. There are a variety of devices that can function to act as access points, which includes older routers.
  • The Powerline extension kits include two devices. One is connected to your router using Ethernet and plug it into the outlet. It is then plugged into the location you’d like to get more Wi-Fi and let the internet signals are transmitted through the electrical wires.
  • Mesh WiFi systems substitute your router by combining one or more devices that create a Wi-Fi internet that connects your entire house with multiple points.

Although all of them work to increase the speed of your Wi-Fi The best option for your network will depend on the layout of your home. If you’ve got just one dead zone that is a problem it is likely that a booster will be a great fit. Mesh systems work best to cover the entire house when your house is big or has a complicated design. Access points is a good idea for homes that are connected via Ethernet.

Eliminate connections that are not needed

If you’re having trouble with bandwidth, you must shut down any devices you don’t use. All devices linked to your internet must be necessary.

The fastest way to detach unnecessary devices is to change your Wi-Fi passwords and then restart your router. After rebooting, you will have to login to your network using the new password on each device that you currently use. This will remove any unnecessary connections, including the emergency phone you don’t shut off that is still downloading updates.

Pro tip:

The router you have may include an application for home networking like NETGEAR Genie, Tether from TP-Link or Xfinity the xFi which can tell you which devices are linked to the network. If you’re running an application that does this, you’ll be able to easily identify connections that are not working and shut them down without disrupting the entire Wi-Fi network. The router’s web interface must contain a similar map of all the devices connected to your network.

Change the Wi-Fi frequency channel.

The 2.4 GHz and 5 GHz bands are split into channels 11, in the first, and 45 on the second. The majority of routers will automatically choose the most suitable channel for you, however there are times when you need to alter the channels manually.

Frequency channels may become crowded in the event that you and all your friends are using the same channel within the 2.4 GHz band, it can affect the speed of your Wi-Fi.

To identify the best Wi-Fi channel to connect to, you can utilize wireless Diagnostics feature on your Mac computer. Just hold the Option key, then click the Wi-Fi icon in the menu bar located in the upper right part of the screen. This Scan window will show the most reliable 2.4 5 GHz and 2.4 channels that are available to you.

If you’re running Windows you can execute an option within Windows PowerShell to see all channels that are available, or download an application like NetSpot. These methods don’t list the most popular channels but rather will require you to identify the top channels by studying the results of the scan.

If you want to switch your Wi-Fi channel to the right channel, you’ll have to connect to the router’s online interface. It’s as easy as entering the IP address of your router into a web browser before entering your password. After logging in, search for the Wi-Fi settings. The option to switch the band channel is there.

Upgrade to speedier internet

While we’re sure these tips will help you, there are times when your internet connection may be slow enough to support your online usage. If this is the situation, you’ll need switch to a more powerful internet plan to experience higher speeds.

Are you unsure of the internet speed you’ll need to help support your online activity? Take a look at our guide to the speed of your internet connection for gaming online and streaming requirements for video.

If you’re certain you’ve paid for adequate internet speed however your connection isn’t able to perform, it may be due to the fact that your internet connection does not always function at 100 100%.

Internet service providers advertise speeds up to a certain amount, but they do not guarantee that you will always be able to enjoy these speeds. Even if you’re on 100 Mbps speeds however, you may not have that bandwidth. In this case you might require an extra buffer or plan that is actually more powerful than you thought you’d require. So, the network slowdowns are still likely to occur however you’ll be less aware of them.

The router and the modem handle all the data you send to the internet. If one isn’t capable of the task, it will cause a slowdown to your entire network. If you’re working with outdated, inefficient equipment is the time to purchase new equipment.

If you lease the equipment of your Internet service provider You can request replacement equipment if you think they’re not up-to-date, particularly when they’re causing problems with performance on your network. Internet providers can provide one wireless gateway, or the standalone modem and router.

Achieving your own router and modemcould help you save money in the long run, particularly in the event that you rent both. A router purchased from a store is a good example, and provides more control over speed, features as well as the security and reliability of your network.

If you’re looking to buy an upgraded router or modem We recommend an DECSIS 3.1 cable modem such as that of the ARRIS Surfboard SB8200. It allows you to connect to 10 Gbps internet via cable when the connection is accessible. The Wi-Fi 5 and Wi -Fi 6 router, such as that of the Google Nest Wifi or ASUS the RT-AX86U are both excellent options.

No Comment

Leave a Reply




error: Content is protected !!